SERIUS COMPACT WELDER   The ultrasonic welders of the Compact Series have been designed and manufactured using state-of–the-art technologies (CAD, CNC). This welder is particularly suitable for welding small parts and its mechanical design is simple and practical. The proven reliability of ultrasonic generators assures the achievement of a constant welding process. Two models of Compact welders are available: bench-type column-type (possibility of insertion into automatic lines) The movement of the transducer holder head is achieved by a pneumatic system on high-precision prismatic guides. The welder is provided with a mechanical lock to control the present welding position. The generators used are available with frequencies of 20 and 36 kHz, with 500 Watt power. The generators are of the last generation and totally digital. They incorporate a backlit display and are enclosed into an elegant metal case. One of the most important characteristics of this welder is certainly the cycle control system run by a MICROPROCESSOR. Technical characteristics: Dimensions 320 x 470 x 700 mm. Working table 300 x 420 mm. Sonotrode stroke 80 mm. Cylinder diameter 40 mm. Microprocessor Compact The welder is controlled by a system based on a last generation microprocessor that can be programmed easily and rapidly. The front panel has a keypad with function keys and a backlit display. The following operations are available: working in constant time mode working with electric stop mode (contact sonotrode/fixture) connection with a rotary table high time resolution(hundredths of seconds) piece counter function Generator Compact The ultrasonic generators DIGITAL SE series have a front panel with a back-lit display on which you can see all the information regarding programming and the instructions for use. The innovative programming is done with a rotating selector switch with confirmation button, which makes the selection extremely easy and rapid. The front panel shows various led indicators that support the control functions and accommodates the test button for starting the ultrasonics SIRIUS DIGITAL SE ULTRA SONIC WELDER   The last generation ultrasonic generators DIGITAL SE series are manufactured and designed for ultrasonic welding of thermoplastic parts. The generators of this series are totally digital and allow all the most important adjustments typical of modern generators. The innovative programming system is done with a rotating selector switch with confirmation button. All the setting operations are feasible with just one grip. The easy using, the available functions and the absolute reliability make this generator unique in its kind. All the generators Digital SE series are provided with a back-lit display and can be supplied with an elegant metal case or just as a module. The generator will be supplied with a high-efficienct converter completely made in titanium. The ultrasonic generators DIGITAL SE series are especially used for the construction of automatic machines. Technical data Power from 500 up to 3000 Watt Frequency 20 - 36 kHz Voltage 230 V 50 Hz Amplitude adjustment 50-100 % Time adjustment Energy adjustment Limit setting for quality control Frequency control function Piece counter function Overload circuit Dimensions 200x410x210 mm SIRIUS USP-M SERIES ULTRA SONIC WELDER The ultrasonic welders of the USP-M series have been designed and manufactured using state-of–the-art technologies (CAD, CNC). The mechanical and electrical solutions adopted grant optimum working conditions with extensive adjustment possibilities, as a result making this welder suitable for a wide range of welding applications. The proven reliability of ultrasonic generators assures a constant welding process. The USP-M welders are available in three models: with base bench-type column-type (possibility of insertion into automatic lines) The movement of the transducer holder head is achieved with a pneumatic system on high-precision prismatic guides. The welder is provided with a mechanical lock to control the present welding position. A wide range of generators is available: systems with an operating frequency of 20 and 36 kHz, with power from 500 up to 3000 Watt. The generators are technically advanced and totally digital. They incorporate a back-lit display and come enclosed into an elegant metal case. One of the most important characteristics of this welder is the cycle control system, which is totally run by a MICROPROCESSOR. Technical characteristics Dimensions 600x500x1200 mm Working table 600x500 mm Sonotrode stroke 100 mm. Max Cylinder diameter 63 mm Working table/sonotrode 0 - 400 mm Microprocessor USP-M The welder is controlled by a system based on a last generation microprocessor. The front panel has a numeric keypad with function keys and a backlit display. The following functions are available: memorisation of 10 welding programs welding with constant time or constant energy mode high time resolution (hundredths of seconds) limit setting for quality control of the welded part setting of welding parameters with indication of part no., horn/sonotrode no.,- working pressure, booster type connection of a printer to record the welding parameters piece counter with good/scrapped part Generator USP-M The ultrasonic generators DIGITAL SE series have a front panel with a back-lit display on which you can see all the information regarding programming and the instructions for use. The innovative programming of the various functions is done with a rotating selector switch with confirmation button, which makes the selection extremely easy and fast. The front panel shows various led indicators that support the control functions and accommodates the test button for starting the ultrasonics. SIRIUS ULC 400 ULTRA SONIC WELDER The last generation portable ultrasonic generator series ULC 400, has been designed and manufactured in order to weld pieces made of plastic material. This generator, totally digital, allows you to make all the adjustments that, until now, have only been available on superior class generators. The ULC 400 generators are provided with a back-lit display. The innovative programming is done with a rotating selector switch with confirmation button. All the setting operations are available with just one grip. The easy using, the available functions and the advantageous price make this generator unique in its kind. Technical characteristics Power 400 Watt Frequency 20-36 kHz Voltage 230V 50 Hz Amplitude adjustment 50-100 % Time adjustment Energy adjustment Limit setting for quality control Frequency control function Piece-counter function Overload circuit Dimensions 250x180x80 mm. SIRIUS USLINEAR ULTRA SONIC WELDER Special ultrasonic welder suitable for welding reflector triangles for cars. Equipped with 2 generators 2000 W – 20 kHz, with a conveyor-belt system. The welder has been connected with an automatic system for loading/unloading of the pieces. SIRIUS USP-E SERIES ULTRA SONIC WELDER The ultrasonic welders of the USP-E Series have been designed and manufactured using state-of–the-art technologies (CAD, CNC).The mechanical and electrical solutions adopted assure optimum working conditions with extensive adjustment possibilities, as a result making this welder suitable for a wide range of welding applications. The proven reliability of ultrasonic generators assures a constant welding process. The USP-E welders are available in three models: with base bench-type column-type (possibility of insertion into automatic lines) The movement of the transducer holder head is achieved with a pneumatic system on high-precision prismatic guides. The welder is provided with a mechanical lock to control the present welding position. A wide range of generators is available: systems with an operating frequency of 20 and 36 kHz, with power from 500 up to 3000 Watt. The generators are technically advanced and totally digital. They incorporate a back-lit display and come enclosed into an elegant metal case. One of the most important characteristics of this welder is the cycle control system, which is totally run by a MICROPROCESSOR Technical characteristics Dimensions 600x500x1200 mm Working table 600x500 mm Sonotrode stroke 100 mm. max Cylinder diameter 63 mm Working table/sonotrode 0 - 400 mm Microprocessor USP-E The welder is controlled by a system based on a last generation microprocessor that can be programmed easily and rapidly. The front panel has a keypad with function keys and a backlit display. The following operations are available: working in constant time mode working with electric stop mode (contact sonotrode/fixture) connection with a rotary table high time resolution (hundredths of seconds) piece counter function Generator USP-E The ultrasonic generators DIGITAL SE series have a front panel with a back-lit display on which you can see all the information regarding programming and the instructions for use. The innovative programming of the various functions is done with a rotating selector switch with confirmation button, which makes the selection extremely easy and fast. The front panel shows various led indicators that support the control functions and accommodates the test button for starting the ultrasonics. SIRIUS USP-M SERIES ULTRA SONIC WELDER The ultrasonic welders of the USP-M series have been designed and manufactured using state-of–the-art technologies (CAD, CNC). The mechanical and electrical solutions adopted grant optimum working conditions with extensive adjustment possibilities, as a result making this welder suitable for a wide range of welding applications. The proven reliability of ultrasonic generators assures a constant welding process. The USP-M welders are available in three models: with base bench-type column-type (possibility of insertion into automatic lines) The movement of the transducer holder head is achieved with a pneumatic system on high-precision prismatic guides. The welder is provided with a mechanical lock to control the present welding position. A wide range of generators is available: systems with an operating frequency of 20 and 36 kHz, with power from 500 up to 3000 Watt. The generators are technically advanced and totally digital. They incorporate a back-lit display and come enclosed into an elegant metal case. One of the most important characteristics of this welder is the cycle control system, which is totally run by a MICROPROCESSOR. Technical characteristics Dimensions 600x500x1200 mm Working table 600x500 mm Sonotrode stroke 100 mm. Max Cylinder diameter 63 mm Working table/sonotrode 0 - 400 mm Microprocessor USP-M The welder is controlled by a system based on a last generation microprocessor. The front panel has a numeric keypad with function keys and a backlit display. The following functions are available: memorisation of 10 welding programs welding with constant time or constant energy mode high time resolution (hundredths of seconds) limit setting for quality control of the welded part setting of welding parameters with indication of part no., horn/sonotrode no.,- working pressure, booster type connection of a printer to record the welding parameters piece counter with good/scrapped part Generator USP-M The ultrasonic generators DIGITAL SE series have a front panel with a back-lit display on which you can see all the information regarding programming and the instructions for use. The innovative programming of the various functions is done with a rotating selector switch with confirmation button, which makes the selection extremely easy and fast. The front panel shows various led indicators that support the control functions and accommodates the test button for starting the ultrasonics. SIRIUS USP-ROTOR SERIES ULTRA SONIC WELDER The ultrasonic welders of the USP-ROTOR series have been designed and manufactured using state-of–the-art technologies (CAD, CNC). These welders are manufactured following customer’s needs. The use of a rotary table with several positions makes the welding cycle faster. An additional automatic ejection systems enables to further increase the productive cycle. The loading of the parts to be welded is usually done manually. The USP-ROTOR welders can be supplied with ultrasonic generators with power from 500 up to 3000 Watt, frequencies of 20 or 36 kHz. The generator will be chosen according to the shape of the parts to be welded. The USP–ROTOR welders are equipped with a cycle control done by a microprocessor. These welders are supplied with safety devices made of anodised aluminium profiles and transparent polycarbonate panels. The access doors to working zone are equipped with safety micro-switches. Otherwise this welders can be equipped with a soundproofing cabinet. Technical Data Pneumatic rotary table with possibility of hydraulic stop Positions available: 4 – 24 Safety protections Sonotrode stroke 100 mm. max SIRIUS USP-T SERIES ULTRA SONIC WELDER The ultrasonic welders of the USP-T series have been designed and manufactured using state-of-the-art technologies (CAD, CNC). These welders are employed for critical applications, where the precision plays an important role. They are used for ultrasonic cutting of fabrics and composite material within textile industry and for cutting membranes and filtering fabrics within the medical field. The solid design and the use of high mechanically-resistant prismatic guides assure optimum working conditions. The USP-T welders are equipped with a special programming system based on a microprocessor and a keypad with function keys and a back-lit display. The proven reliability of these generators is a basic condition for a constant welding quality. Three versions are available: with base bench-type column-type (possibility of insertion into automatic lines) Generators with power up to 3000 Watt are available. Technical characteristics Dimensions 600x500x1200 mm Machine table 600x500 mm Sonotrode stroke max. 100 mm Cylinder diameter 80 mm Machine table /sonotrode 0 - 400 mm Electric stop Generator The ultrasonic generators DIGITAL SE series have a front panel with a back-lit displayon which you can see all the information regarding programming and the instructions for use. The innovative programming of the various functions is done with a rotating selector switch with confirmation button, which makes the selection extremely easy and fast. The front panel shows various led indicators that support the control functions and accommodates the test button for starting the ultrasonics.