2nd User Foot Welder

RADYNE 35CW Foot Welder

Machine specifications

• Generator 3.5Kw
• Foot operated press
• Two hand control buttons for welding operation
• Pressure adjustment through head adjustment 

The machine has been refurbished to a good standard and will come with a 3 month parts and labour warranty

Tne ZD4NP footwelder has a pneumatic as well as foot pedal control. Basically you can lower the press using the footpedal and when in correct position the two push buttons are pressed which allow high pressure and HF power to be initiated.

The foot pedal is operated from the side alllowing large products to be placed in the front of the press such as a mattress for end welding

The machine has:

Generator 4Kw

Pneumatic press

Foot pedal at the side

Conforms to the CE, CEMFAW 2016 and EMC regulations

The machine is available for demonstration at our Bradford factory

Video

DEPTA 4Kw footwelder 

The machine has the following:

• 4Kw output power, up to 20sq inch of weld power depending on materials
• Auto tuning of the power, keeps the same set power through the day without constantly adjusting the power and time
• 3 stage power control, you can have at stage 1 - 1.5Kw, stage 2 - 2.5 Kw and stage 3 -  4.0Kw
• Operator touch screen, allows the operator to set the tooling parameters and store them for later use. Adjust the power,  power-plate start position, delay time, set power 0.30 – 1.50 amp, weld time and weld count
• You can set the power control for full automation, ramps up the power to the set level and then keeps it there until the weld is complete. If the power starts to climb the auto tuning brings the power back to the set point.
• Semi-automated power control for part automation, you set the power manually and only when the power arrives at the set point and begins to go higher does the auto tuning operate to bring the power back to the set point. This stops the power from running away, going higher
• Manual, you can set the machine to work as a manual operated machine
• The machine conforms to the CE, EMC and CEMFAW 2016 regulations
• The machine was designed to be ergonomic and easy to use
• All panels have safety switches or lock key and when a panel is opened the machine is completely shut down which does not allow any chance of operator setter, technician to come in contact with live energy

Stanelco DH40 4Kw foot welder 

The machine has:

• Twin station operation
• 4Kw generator
• 27.12 MHz
• Adjustable power and delay, weld and cool time for each station
• Very good condition

The machine is already in a good condition but will be fully checked and will come with a 3 month parts and labour warranty

Video

We have purchased more DEPTA machines due to the demand

Please see details on the machines below:

DEPTA ZD4N foot welder

• 4Kw output power, up to 20sq inch of weld power depending on materials
• Auto tuning of the power, keeps the same set power through the day without constantly adjusting the power and time
• 3 stage power control, you can have at stage 1 - 1.5Kw, stage 2 - 2.5 Kw and stage 3 -  4.0Kw
• Operator touch screen, allows the operator to set the tooling parameters and store them for later use. Adjust the power,  power-plate start position, delay time, set power 0.30 – 1.50 amp, weld time and weld count
• You can set the power control for full automation, ramps up the power to the set level and then keeps it there until the weld is complete. If the power starts to climb the auto tuning brings the power back to the set point.
• Semi-automated power control for part automation, you set the power manually and only when the power arrives at the set point and begins to go higher does the auto tuning operate to bring the power back to the set point. This stops the power from running away, going higher
• Manual, you can set the machine to work as a manual operated machine
• The machine conforms to the CE, EMC and CEMFAW 2016 regulations
• The machine was designed to be ergonomic and easy to use
• All panels have safety switches or lock key and when a panel is opened the machine is completely shut down which does not allow any chance of operator setter, technician to come in contact with live energy

The machine is available but due to recent increase in sales, if you are interested please contact our sales department

Video

We have purchased more DEPTA machines due to the demand

Please see details on the machines below:

DEPTA ZD4N foot welder

• 4Kw output power, up to 20sq inch of weld power depending on materials
• Auto tuning of the power, keeps the same set power through the day without constantly adjusting the power and time
• 3 stage power control, you can have at stage 1 - 1.5Kw, stage 2 - 2.5 Kw and stage 3 -  4.0Kw
• Operator touch screen, allows the operator to set the tooling parameters and store them for later use. Adjust the power,  power-plate start position, delay time, set power 0.30 – 1.50 amp, weld time and weld count
• You can set the power control for full automation, ramps up the power to the set level and then keeps it there until the weld is complete. If the power starts to climb the auto tuning brings the power back to the set point.
• Semi-automated power control for part automation, you set the power manually and only when the power arrives at the set point and begins to go higher does the auto tuning operate to bring the power back to the set point. This stops the power from running away, going higher
• Manual, you can set the machine to work as a manual operated machine
• The machine conforms to the CE, EMC and CEMFAW 2016 regulations
• The machine was designed to be ergonomic and easy to use
• All panels have safety switches or lock key and when a panel is opened the machine is completely shut down which does not allow any chance of operator setter, technician to come in contact with live energy

The machine is available but due to recent increase in sales, if you are interested please contact our sales department

Video

We have purchased more DEPTA machines due to the demand

Please see details on the machines below:

DEPTA ZD4N foot welder

• 4Kw output power, up to 20sq inch of weld power depending on materials
• Auto tuning of the power, keeps the same set power through the day without constantly adjusting the power and time
• 3 stage power control, you can have at stage 1 - 1.5Kw, stage 2 - 2.5 Kw and stage 3 -  4.0Kw
• Operator touch screen, allows the operator to set the tooling parameters and store them for later use. Adjust the power,  power-plate start position, delay time, set power 0.30 – 1.50 amp, weld time and weld count
• You can set the power control for full automation, ramps up the power to the set level and then keeps it there until the weld is complete. If the power starts to climb the auto tuning brings the power back to the set point.
• Semi-automated power control for part automation, you set the power manually and only when the power arrives at the set point and begins to go higher does the auto tuning operate to bring the power back to the set point. This stops the power from running away, going higher
• Manual, you can set the machine to work as a manual operated machine
• The machine conforms to the CE, EMC and CEMFAW 2016 regulations
• The machine was designed to be ergonomic and easy to use
• All panels have safety switches or lock key and when a panel is opened the machine is completely shut down which does not allow any chance of operator setter, technician to come in contact with live energy

The machine is available but due to recent increase in sales, if you are interested please contact our sales department

RADYNE 35CW Foot Welder

Machine specifications

• Generator 3.5Kw
• Foot operated press
• Two hand control buttons for welding operation
• Pressure adjustment through head adjustment 

The machie will be refurbished to an good standard and will come with a 3 month parts and labour warranty

Radyne 35CW 3.5Kw foot welder

The machine is refurbished and will come with a 3 month parts and labour warranty

Stanelco FP 40 4Kw foot welder

• Generator: 4Kw
• Foot pedal operation
• Push button control
• Antiflash unit

The machine is being refurbished and will come with a 3 month parts and labour warranty

Radyne 35CW 3.5Kw foot welder

The machine has been refurbished and will come with a 3 month parts and labour warranty

Foot operation of the press

3.5K generator

Radyne 6CW welder

Generator 600 watt

Tube welding capabilities

Radyne 6CW welder

Generator 600 watt

Radyne 15CW 1.5 Kw foot welder

Refurbished and will come with a 3 month parts and labour warranty

Radyne foot welder with 1.5Kw generator

The machine is in a good condition and has been refurbished

The machine is available to carry out welding trials

The machine is 240V single phase

Radyne 2.8Kw foot welder 

The machine has been refurbished and will come with a 3 month warranty

The machine has a 240V single phase supply